One, main shaft is controlled 1, the dot is moved fall in type of hand movable mould, press main shaft dot moves key, can make main shaft is turning the dot is moved. 2, successive movement falls in type of hand movable mould, press main shaft, invert key, main shaft rotates by the speed of set, by stop to bolt main shaft stops, also can stop main shaft by restoration key. Issueing be classified M03, M04 and M05 automatically to be able to realize the successive control of as above with MDI means. 2, the motion of reference axis is controlled 1, fine tuning is operated (1) enter fine tuning to operate mode above all, choose to shift is measured and want mobile reference axis again. (2) press right way next jolty hand artery develops generator handwheel. (3) coordinate shows the basis to whether obtain target position certainly. 2, type of movable mould of hand of successive feed choice, the successive feed that presses key of motion of aleatoric reference axis can realize this axis (feed speed is OK set) , release this key, motion stops. 3, sudden shift presses reference axis and sudden shift bolt at the same time, can realize the sudden shift of this axis, athletic speed is G00. 3, common breakdown and processing move control machine tool to move in the hand (or automatic treatment) when, if the machine tool moves the ultimate position that the component exceeds his to move (software travel spacing or mechanical spacing) , criterion the system appears exceed Cheng to call the police, buzzer screams or call the police the light is bright, the machine tool chains. The processing technique is commonly: 1, the hand is moved move component exceeding Cheng to safe journey inside; 2, remove call the police. [MP=400, 300, true]http://www. C-cnc.
Com/news/file/2006-11/sdkz.
Wmv[/MP] CNC Milling