Grinder of use dragon door from time to tome the item that what need notices?

  • Time:
  • Click:296
  • source:LAURENDA CNC Machining
The structure of planer-type milling machine basically is with dragon mast is given priority to, the assorted application of each components ensured planer-type milling machine develops due effectiveness. When undertaking operating to planer-type milling machine, a lot of situations need an attention, assured the safety of personnel and equipment. 1, early work when, thing must want to use the tool with other perhaps and special bolt to undertake its fixed. Not OK when using common wrench outside bushing, otherwise spanner ten thousand glance falls down to may cause harm to the person. 2, the cutting tool of milling machine must want to secure, the phenomenon that if have,becomes loose when cannot move in order to start absolutely. 3, before planer-type milling machine moves, the moving case that wants the drive disk assembly that checks it carefully first, want to give installation to end the fender of the machine tool at the same time, such ability can be started formally move. 4, when using machine tool mill to cut all sorts of work, be in especially thick mill when, must want when just was started slowly dissection workpiece. 5, when wanting to change workbench and tool carrier position, want to give the bolt that has fixed effect namely above all loose. 6, cutting tool is in assemble and unassemble among the process, can use cupreous weight or mallet gently tone is hit, avoid cutting tool fragment to fly to cause harm to the person later. 7, when using planer-type milling machine to undertake cutting, speed cannot change at will, the hand should maintain certain distance with cutting tool, also cannot measure workpiece in this process. CNC Milling