Electric machinery of main shaft of carpentry engraving tool removes rubiginous means
Time:
Click:148
source:LAURENDA CNC Machining
Main shaft of carpentry engraving tool rusts is the difficult problem that puzzles a lot of users. Because of the reason of working environment, if maintain not seasonable, main shaft electric machinery rusts very easily, rust slightly use what do not affect main shaft electric machinery normally, but if be not handled for long, can shorten the life of main shaft electric machinery. Electric machinery of main shaft of carpentry engraving tool removes rubiginous means: One, armrest labour is knocked, shovel, blow, brush, arenaceous or flexible the method of defeat will eliminate skin of outside rust dirty, oxidation to wait, this is lacquering the radical method that divide rust, also can use hammer of moldboard, drawknife, cusp, steel wire to brush, emery cloth, break the tool such as saw blade, this kind of method is simpler, but machine of easy also attaint, the maintenance technician when undertaking dividing rust needs very careful, do not create course of deviate of machine main shaft easily alertly a bit. 2, use clean lubricant, even gush is on electric machinery, can use cotton cloth erase in one's childhood partly probably Shi Caidiao gets rubiginous mark above quarter machine, if fierce word of rust but much gush a few lubricant. Lubricant cleaner is not electric, and have very good lubricant effect. CNC Milling